Algoma Contractors Inc.

Services

From our in-house industrial sandblasting & coating shop to our industrial painting, coating, and concrete restoration services in the field, Algoma offers a range of coating services to meet your needs.

Sandblasting & Coating Shop
industrial painting and coating
Plural Component Coating
Concrete Restoration

sandblasting & Coating shop

Located in Beamsville, our industrial sandblasting and coating shop is central to Niagara Falls and Hamilton, Ontario, and within close proximity to the highway for easy access.

Our 10,000-square-foot facility features brand-new industrial painting and sandblasting equipment including a crane capable of lifting 15 tonnes.

Anything that can be transported, whether a piece of factory machinery; vessels, truck/trailer mounted apparatus; concrete troughs, or large, manufactured components can be cleaned, sandblasted or otherwise prepared, then painted in our shop. Algoma Contractors performs work for industrial firms, transportation companies, and manufacturing facilities throughout the Niagara region and Southern Ontario. Our staff is qualified to work with many types of sandblasting material and techniques and applying the appropriate paint or coating using specialized spray equipment in our fully enclosed shop. Our sandblasting and coating shop is climate-controlled (from wind, heat, humidity, etc.) allowing us to sandblast and apply protective coatings all year round and under stable conditions.

Shop services include:

  • Industrial Sandblasting
  • Industrial Painting and Coating (Epoxy, Zinc, Multiheritage, Polyurethane etc.)
  • DFT meter thickness readings and reporting
Extend the life of your steel or concrete capital equipment while increasing the value of these important assets. Call us today to discuss your next industrial sandblasting and coating project: 905 563 3882  

Industrial PAinting and Coating

High-performance industrial paint and coatings are designed to protect surfaces from a corrosive or abrasive environment. These coatings are mainly used for primary (inside surfaces of a tank or vessel) and secondary (outside surfaces) containment of leaks or spills. 

These coatings require specialized knowledge and extensive experience in the various types of preparations and applications.

Paints and Coatings include:

  • Architectural
  • Elastomeric polyurethanes
  • 100% solids epoxy coatings
  • Chemical resistant coatings
  • Abrasion resistant coatings
  • Built-Up floor coating systems
  • Traffic topping
  • Intumescent Fireproofing and Fire-Retardant Coatings

We welcome consultations with architects, engineers and building owners on the use of various high-performance coatings.

With a wide variety of industrial painting skills, specialty coating services, and a 40+-year reputation, Algoma Contractors can meet all your industrial painting and coating requirements, while minimizing the cost of your project. Contact us for a quote on your industrial painting project today.

Plural Component Coatings Application

For some industrial painting jobs, a more sophisticated and heavy-duty plural component coating/painting solution may be needed. The unique chemistry in the epoxy, polyurea, & polyurethane blends commonly used in Plural Component Coatings allows for these coating properties to succeed where other paints would fail.

Algoma’s skilled applicators have the experience to use the specialized tools needed to apply these Plural Component paints correctly for optimal performance and according to specifications.

The application procedure is pivotal to the technology and fast refill times will ensure your project keeps moving. Plural component painting has properties that may be beneficial to your painting needs. These include:

  • Fast curing times
  • Fast Return to Service
  • Solvent / VOC free
  • Corrosion Protection
  • Waterproofing
  • Chemical, Shock, and Environmental Resistance

Call Algoma Contractors at 905 563 3882 today and find out how our plural component coatings application can fulfill your project needs.

Concrete Restoration

Concrete restoration focuses on bringing structural integrity back to engineering standards without the costly expense of total reconstruction. We can repair old deteriorated or corroded concrete construction and restore it to its original state.

Some of the ways these concrete structures are repaired are by strengthening, injecting, and forming and pouring.

Services Include:

  • Inspection and testing
  • Specialized job-specific supervision
  • Scaling/spalling repair
  • Rebar removal/replacement
  • Epoxy injection
  • Urethane injection
  • Carbon fibre strengthening
  • Expansion joint removal/replacement
  • Underlayment/thin set
  • Surfacing

Algoma’s concrete restoration services can be used for the structural repair of all types of buildings, sewage and water retaining structures, highways and bridges, reinforced concrete buildings, marine structures, parking garages and paved areas.

We offer comprehensive solutions to clients faced with defects in all concrete structure types. Contact us today.

Sandblasting & Coating Shop

Our brand-new sandblasting and coating shop is located in Beamsville, Ontario, centrally between Niagara Falls and Hamilton, and within close proximity to the highway for easy access. Our 10,000 square foot facility features brand-new equipment including a crane capable of lifting 15 tonnes. The shop can accommodate large equipment, steel vessels, aerial equipment, and more.

Shop coating work is desired for the stable conditions offered. Our facility is fully enclosed and climate controlled (wind, humidity and heat), allowing us to sandblast and apply protective coatings all year round.

Our shop services include:

  • Coatings (Epoxy, Zinc, Multiheritage, Polyurethane etc.)
  • DFT meter thickness readings and reporting
  • Sandblasting

Industrial Painting and Coating

High-performance industrial paint and coatings are designed to protect surfaces from a corrosive or abrasive environment. These coatings are mainly used for primary (inside surfaces of a tank or vessel) and secondary (outside surfaces) containment of leaks or spills. 

These coatings require specialized knowledge and extensive experience in the various types of preparations and applications.

Paints and Coatings include:

  • Architectural
  • Elastomeric polyurethanes
  • 100% solids epoxy coatings
  • Chemical resistant coatings
  • Abrasion resistant coatings
  • Built-Up floor coating systems
  • Traffic topping
  • Intumescent Fireproofing and Fire-Retardant Coatings

We welcome consultations with architects, engineers and building owners on the use of various high-performance coatings.

With a wide variety of industrial painting skills, specialty coating services, and a 40+-year reputation, Algoma Contractors can meet all your industrial painting and coating requirements, while minimizing the cost of your project. Contact us for a quote on your industrial painting project today.

Plural Component Coating

For some industrial painting jobs, a more sophisticated and heavy-duty plural component coating/painting solution may be needed. The unique chemistry in the epoxy, polyurea, & polyurethane blends commonly used in Plural Component Coatings allows for these coating properties to succeed where other paints would fail.

Algoma’s skilled applicators have the experience to use the specialized tools needed to apply these Plural Component paints correctly for optimal performance and according to specifications.

The application procedure is pivotal to the technology and fast refill times will ensure your project keeps moving. Plural component painting has properties that may be beneficial to your painting needs. These include:

  • Fast curing times
  • Fast Return to Service
  • Solvent / VOC free
  • Corrosion Protection
  • Waterproofing
  • Chemical, Shock, and Environmental Resistance

Call Algoma Contractors at 905 563 3882 today and find out how our plural component coatings application can fulfill your project needs.

Concrete Restoration

Concrete restoration focuses on bringing the structural integrity back to engineering standards without the costly expense of total reconstruction. We can repair old deteriorated or corroded concrete construction and restore it to the original state. Some of the ways these structures are repaired is by strengthening, injecting and form and pour.

This type of service can be used for the structural repair of all types of buildings, sewage and water retaining structures, highways and bridges, reinforced concrete buildings, marine structures, parking garages and paved areas. We offer comprehensive solutions to clients faced with  defects in all structure types.

Services Include:

  • Inspection and testing
  • Specialized job specific supervision
  • Scaling/spalling repair
  • Rebar removal/replacement
  • Epoxy injection
  • Urethane injection
  • Carbon fibre strengthening
  • Expansion joint removal/replacement
  • Underlayment/thin set
  • Surfacing

Our Trusted Suppliers